End-wall ventilation in combination with R - P.THG76RGC
We are happy to help you with making a calculation
Get in contact with usEndwall truss-rail ventilation systems are used for extra ventilation in the endwall section. With the RGC system, the rack boxes are placed in line with the other gear racks and mounted on a C-profile between the gutters. These gear racks move one row of endwall ventilation windows in a section. They are connected to drive tubes with chain couplings for the necessary angle correction and driven by a GW motor gearbox.
- Better climate in the head compartments.
- Very easy installation on standard C-profile.
- Suitable for 5/4" prefabricated drive shafts.
- Highly suitable for heavy load in combination with THG76R.
Rack box
| Article | Description | F [N] | T [Nm] | i [-] | L [mm] | S [mm] | s [mm/rev] | n [rev] | m [kg] |
| P.THG76RGC.1.S0730 | THG76RGC 15kN m4, L1100 S0730mm | 15000 | 60,50 | 6,000 | 1100 | 730 | 23 | 33 | 14,0 |
 2 P.THG76RGC.1.S0730 11 THG76RGC 15kN m4, L1100 S0730mm 12 13 P.THG76RGC.1.S0000.jpg 14 15 CAT_P.THG76RGC.1.S0000_2D.gif 16 17 10 | |||||||||
| P.THG76RGC.1.S0880 | THG76RGC 15kN m4, L1250 S0880mm | 15000 | 60,50 | 6,000 | 1250 | 880 | 23 | 39 | 14,8 |
2 P.THG76RGC.1.S0880 11 THG76RGC 15kN m4, L1250 S0880mm 12 13 P.THG76RGC.1.S0000.jpg 14 15 CAT_P.THG76RGC.1.S0000_2D.gif 16 17 10 | |||||||||
| P.THG76RKGC.1.S1050 | THG76RKGC 15kN m4, L1550 S1050mm | 15000 | 60,50 | 6,000 | 1550 | 1050 | 23 | 48 | 15,9 |
 2 P.THG76RKGC.1.S1050 11 THG76RKGC 15kN m4, L1550 S1050mm 12 13 P.THG76RKGC.1.S0000.jpg 14 15 CAT_P.THG76RKGC.1.S0000_2D.gif 16 17 10 |
Coupling set
Coupling set fastener
| Article | Description | B [mm] | m [kg] |
| P.SKP.BVM.25 | BVM coupling set - THG76 rack | 40 | 0,03 |
Locking
| Article | Description | m [kg] |
| P.ABR.24 | Shaft locking ring 24 DIN6799 EZ | 0,01 |
Slide bearing plate
| Article | Description | A [mm] | L [mm] | m [kg] |
| P.GL125.R.L190 | Slide bearing plate 5/4" R A135 L190 mm | 135 | 190 | 0,3 |
| P.GL125.R.L195 | Slide bearing plate 5/4" R A140 L195 mm | 140 | 195 | 0,3 |
Weld sprockets
| Article | Description | Chain | Shaft | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.LKWL10B.Z16.D125 | Weld sprocket 10B z16 - 5/4" | 10B z16 | D125 | 420 | 43 | 96 | 30 | 0,4 |
 2 P.LKWL10B.Z16.D125 11 Weld sprocket 10B z16 - 5/4" 12 13 P.LKWL10B.Z16.D125.jpg 15 16 CAT_P.LKWL10B.Z16.D125_2D.gif 17 10 |
Chains
| Article | Description | Tmax [Nm] | D [mm] | m [kg] |
| P.KTG10B-2.Z16 | Chain 10B z16 | 420 | 96 | 0,5 |
Tube bolt chain coupling on THG76RGC
| Article | Description | Tmax [Nm] | D2 [mm] | D3 [mm] | L1 [mm] | L3 [mm] | m [kg] |
| P.BBKK10B.ZK.D125 | Tube bolt CC set 10B ZK z16 5/4" | 420 | 43,1 | 96 | 30 | 150 | 1,9 |
 2 P.BBKK10B.ZK.D125 13 Tube bolt CC set 10B ZK z16 5/4" 17 18 P.BBKK10B.ZK.D000.jpg 20 21 CAT_P.BBKK10B.D00.D125_2D.gif 10 |
Drive systems for ventilation
Rapidly varying weather conditions are the order of the day. The need for good, accurate ventilation systems and airtightness in larger production greenhouses is becoming increasingly important. New cultivation requires insights for less, accurate and metered ventilation in combination with more screens with the aim of keeping as much heat and moisture as possible in the greenhouse to save energy. To achieve an optimal climate through optimal ventilation, our drives are essential for optimal results.
De Gier Drive Systems
+ 31 174 29 20 89